View M141X101_1795193.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lcd module specification products name:apax t1 4 c 2 3 5.7 cm(1 4.1 inch) xga(1024x768) 262k color tft lcd module 5.0 v l preliminary specification this technical specification is tentative and it will be changed without notice. ?ia1~a?|3--?q x_?o????? 76 ?? 39 ?1 4 ? tel:02 - 87912868 fax:02 - 87912869 version. 1.0 www..net
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 2/25 version 2.3 contents revision history general description 1. absolute maximum ratings 2. electrical specifications 3. interface specifications 3.1 the pin assignment of ttl interface connector 3.2 input signal timing specifications 3.3 color data input assignment 3.4 power up/down sequence 4. optical specifications 5. reliability test item 6. mechnical drawings 7. precaution 7.1 assembly and handling precaution 7.2 safty precaution 8. packaging 8.1 packing specifications 8.2 packing method 9. incoming inspection day 10. definition of shipping label on module
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 3/25 version 2.3 revision history version date descpiption ver 1.0 ver 2.0 ver 2.1 sep.10?99 nov.11?99 jan.31?00 issue preliminary specification. page 6/25 - to revise the mechanical specifications page 7/25 - to change the absolute maximum ratings of humidity page 8/25 - to add notes statement in electrical specifications page 11/25 - 3.2 input signal timing specifications is modified and added the values which is tbd in version 1.0. page 12/25 - to revise the tvdb interval in input signal timing diagram. page 14/25 - the illustration of power up/down sequence is modify. page 15/25 ~ 18/25 - to revise the optical specifications and modify the illustration of notes. page 21/25 - add the precaution statement. page 22/25~24/25 - add the illustration of packaging method issue approval specification. page 6/25 - add block diagram - a dd ? gap, panel surface with metal frame? spec. in mechanical specifications. page 7/25 - change the humidity condition in absolute maximum ratings. old ->operation : 20% ~ 90% relative humidity non operation : 5% ~ 85% relative humidity new ->operation : 20% ~ 95% relative humidity, ta 40oc storage: 5% ~ 95% relative humidity ,ta 40oc - add min./max. value for ? power supply current? in electrical specifications ( module). - add min./max. value for ? power consumption? in electrical specifications ( backlight).
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 4/25 version 2.3 revision history ( continuation) version date descpiption ver 2.1 ver 2.2 ver 2.3 jan.31?00 mar.1?00 may.23?00 page 11/25 - the following notes are attachment on input signal timing specifications 1.data is latched at falling edge of dclk in the spec. dclk should appear during all blanking period. 2.vsync and hsync are negative polarity in the spec. 3.de (data enable) should be positive polarity in the spec. 4.hsync should appear during blanking period of frame cycle. page 15/25 - add cross talk specifications in optical specifiactions page 19/25 - add note 9: definition of cross talk(ct) page 20/25 - add 5.reliability test item page 24/25 - add 9. incoming inspection day page 7/25 -to change the lamp voltage in 2. electrical specifications old : 640 (typ.) ==> new : 560(min.)/630(typ.)/700(max.) -to change the startup volage in 2. electrical specifications old : 985(25oc)/1450(0oc) ==> new : 1 255(25oc)/1385(0oc) page 8/25 - to add the test pattern for power supply current. page 18/25 - to update the illustration for cross talk definition in note 10. page 20/25 - to add the criterion after reliability test item. page 15/25 - to revise response time old ==> tr =20(typ.)/35(max.) , tf =30(typ.)/45(max.) ms new==> tr =15(typ.)/30(max.) , tf =35(typ.)/50(max.) ms page 11/25 - to revise ?data? in 3.2 input signal timing specifications. old setup time: -(min.)/7.0(typ.); new setup time: 5.0(min.)/-(typ.) old hold time: -(min.)/7.0(typ.); new hold time: 6.0(min.)/-(typ.)
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 5/25 version 2.3 revision history ( continuation) version date descpiption page 25/25 - add 10. definition of shipping label on module. page 6/25 - to change the depth specification old -> 16.0 (typ.) / 16.2( max.), new -> 17.0 (typ.) /18.0( max.) page 7/25 - to change the color of lamp power cable. old -> hv is white / lv is black new -> hv is pink / lv is white page 12/25 - to revise the dclk/data/de clock diagram. page 15/25 - to revise the chromaticity specification. attached drawing - to revise the attached drawing .
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 6/25 version 2.3 general description overview this product is a 14.1? tft liquid crystal display module with a 2 lamps backlight unit and 60 pins ttl interface. this module supports 1024 x 768 xga mode and can display 262,144 colors. the inverter module for backlight is not built in. block diagram application -tft-lcd monitor general specificati0ns item specifications unit screen size 14.1 diagonal inch bezel opening area 289.8(w)x218.4(h) mm effective display area 285.7(w)x214.3(h) mm pixel number 1024 x r.g.bx768 pixel pixel pitch 0.279(h)x0.279(v) mm pixel arrangement r.g.b vertical stripe - display color 6 bits, 262,144 color transmissive mode normally white - surface treatments hard coating(3h) and anti-glare - mechanical specifications item min. typ. max. unit horizontal 329.5 330 330.5 mm vertical 254.5 255 255.5 mm module size depth - 17.0 18.0 mm weight - 1250 1300 g gap, panel surface with metal frame - - 0.5 mm vcc v l tft-lcd panel (1024x768x3) data driver ic scan driver ic backlight unit timing control asic dc/dc converter & reference voltage generator in p ut connector ( molex- 52760-0600 ) lamp connector ( jst-bhr-03vs-1) hsync vsync enab dclk re0~5 ge0~5 be0~5 ro0~5 go0~5 bo0~5 v cc gnd
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 7/25 version 2.3 1. absolute maximum ratings values parameter symbol min. max. unit remarks power supply voltage vcc -0.3 +6.0 v logic input voltage vin -0.3 vcc+0.3 v ta=25oc operating temperature top 0 +50 oc module surface* storage temperature tst -20 +60 oc - operation 20%~95% relative humidity ta<=40oc humidity non operation 5%~95% relative humidity ta<=40oc *measure at the active display area 2. electrical specifications module value parameter symbol min. typ. max. unit notes power supply voltage v cc 4.5 5.0 5.5 v power supply current l cc 140 290 600 ma ripple voltage v rp - 50 - mv ?h? level logical input voltage v ih 2 - vcc v ?l? level logical input voltage v il vss - 1 v 1 backlight ( 2 lamps) ta=25 2 o c value parameter symbol min. typ. max. unit notes lamp voltage v l 560 630 700 v rms i l =6.0ma lamp current i l 1.0 6.0 8.0 ma 2 - - 1255 (25 o c) v rms 3 startup voltage v s - - 1385 (0 o c) v rms 3 operating frequency f l 30 50 70 khz 4 power consumption p l 6.8 7.6 8.4 w 5, i l =6.0ma lamp life time l bl 50000 - - hrs 6 the connector information of black light unit. pin symbol description remark 1 hv lamp power input pink 2 nc no connect - 3 lv ground white connector part no.: bhr-03vs-1 (jst) user?s connector part no.: sm02 (8.0) b-bhs-1-tb (jst)
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 8/25 version 2.3 note1: operating temperature range : 0 ~ 50 oc. power supply current specifications are tested by the following test pattern. (a) minimal value test pattern : white pattern (b)typical value test pattern : 64 gray scale pattern (c) maximal value test pattern : vertical 2 pixel white/black pattern gray 0 gray 63 gray 63 r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 9/25 version 2.3 note 2: lamp current is measured by utilizing a current meter for high frequency as shown below: note 3: the voltage shown above should be applied to the lamp for more than 1 second after startup. otherwise the lamp may not be turned on. and the start voltage at 0oc is the condition that stabilizes in the lamp, and it is the value that guarantees the lighting of the lamp. note 4: the lamp frequency may produce interference with horizontal synchronous frequency from the display, and this may cause line flow on the display. in order to avoid interference the lamp frequency should be detached from the horizontal synchronous frequency and its harmonics as far as possible. . note 5: p l = i l v l 2. note 6: the lifetime (hr) of a lamp can be defined as the time in which it continues to operate under the condition ta = 25 2 o c and i l = 6.0 marms until one of the following event occurs: (1) when the brightness becomes 50% or lower than its original, (2) when the effective ignition length becomes 80% or lower than its original value. (effective ignition length is defined as an area that has less than 70% brightness compared to the brightness in the center point.) note 7: the waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. the performance of the backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the dc-ac inverter for the lamp. all the parameters of an inverter should be designed with care so as not to produce too much current leakage from high-voltage output of the inverter. when designing or ordering the inverter, please make sure that a poor lighting caused by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occurs. when the above situation is confirmed, the module should be operated in the same manners as it is installed in your instrument. lcd module 1 2 inverter a hv(whit e) lv ( b l a c k )) current meter
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 10/25 version 2.3 3. interface specifications 3.1 the pin assignment of ttl interface connector. pin no. symbol i/o function pin no. symbol i/o function 1 gnd - ground 31 ge1 i green even data 1 2 ro0 i red odd data 0 32 ge2 i green even data 2 3 ro1 i red odd data 1 33 ge3 i green even data 3 4 ro2 i red odd data 2 34 ge4 i green even data 4 5 ro3 i red odd data 3 35 ge5 i green even data 5 6 ro4 i red odd data 4 36 gnd - ground 7 ro5 i red odd data 5 37 be0 i blue even data 0 8 gnd - ground 38 be1 i blue even data 1 9 go0 i green odd data 0 39 be2 i blue even data 2 10 go1 i green odd data 1 40 be3 i blue even data 3 11 go2 i green odd data 2 41 be4 i blue even data 4 12 go3 i green odd data 3 42 be5 i blue even data 5 13 go4 i green odd data 4 43 gnd - ground 14 go5 i green odd data 5 44 vsyn i vertical sync. 15 gnd - ground 45 hsyn i horizontal sync. 16 bo0 i blue odd data 0 46 enab i data enable signal 17 bo1 i blue odd data 1 47 gnd - ground 18 bo2 i blue odd data 2 48 gnd - ground 19 bo3 i blue odd data 3 49 dclk i dot clock signal 20 bo4 i blue odd data 4 50 gnd - ground 21 bo5 i blue odd data 5 51 gnd - ground 22 gnd - ground 52 nc - must be floating 23 re0 i red even data 0 53 nc - must be floating 24 re1 i red even data 1 54 gnd - ground 25 re2 i red even data 2 55 gnd - ground 26 re3 i red even data 3 56 gnd - ground 27 re4 i red even data 4 57 vdd - +5v power supply 28 re5 i red even data 5 58 vdd - +5v power supply 29 gnd - ground 59 vdd - +5v power supply 30 ge0 i green even data 0 60 vdd - +5v power supply connector part no.: 52760-0600(molex) user?s connector part no: 53475-0600(molex)
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 11/25 version 2.3 3.2 input signal timing specifications the specifications of input signal timing are as the following table and timing diagram . signal parameter symbol min typ max unit remarks pixel clock frequency fck 25 32.5 40 mhz pixel clock period tck 40 30 25 ns duty ratio (%tch) - 40 50 60 % tch/tck rise time trck - 7.9 - ns dclk fall time tfck - 7.3 - ns setup time tsd 5.0 - - ns hold time thd 6.0 - - ns rise time trd - 8.9 - ns data fall time tfd - 8.2 - ns setup time tsde 4 5.8 - ns de hold time thde 4.5 6.2 - ns vertical frequency fv 50 60 75 hz vertical period tvp 769 806 1000 thp vertical display blank period tvdb 1 38 232 thp vertical display active period tvda 768 768 768 thp vertical sync. back porch vbp 0 29 199 thp vertical sync. front porch vfp 0 3 199 thp vsync vertical sync. pulse width vpw 1 6 200 thp horizontal period thp 575 672 806 tck horizontal display blank period thdb 63 160 294 tck horizontal display active period thda 512 512 512 tck horizontal sync. back porch hbp 52 53 281 tck horizontal sync. front porch hfb 0 35 281 tck hsync horizontal sync. pulse width hpw 52 73 243 tck note: 1.data is latched at falling edge of dclk in the spec. dclk should appear during all blanking period. 2. vsync and hsync are negative polarity in the spec. 3.de (data enable) should be positive polarity in the spec. 4. hsync should appear during blanking period of frame cycle.
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 12/25 version 2.3 input signal timing diagram 2.0 v 1 t vp t vda t vdb 2 768 768 valid display data (1024 tck) v pw de t fck t rck 0.8 v 20v t hde t rd / tfd t ch t ck dclk data t sde t hd t sd 0.8 v h pw de t hdb dclk invalid valid data h bp t hp h fp t hda hsync hsync v bp v fp vsync de 2.0 v 15v
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 13/25 version 2.3 3.3 color data input assignment data signal red green blue odd ro5 ro4 ro3 ro2 ro1 ro0 go5 go4 go3 go2 go1 go0 bo5 bo4 bo3 bo2 bo1 bo0 color even re5 re4 re3 re2 re1 re0 ge5 ge4 ge3 ge2 ge1 ge0 be5 be4 be3 be2 be1 be0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0) / dark red(1) red(2) : : red(61) red(62) red(63) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0) / dark green(1) green(2) : : green(61) green(62) green(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0) / dark blue(1) blue(2) : : blue(61) blue(62) blue(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 14/25 version 2.3 correspondence between data and display position s0001 s0002 s0003 s0004 s0005 s0006 s0007 s0008 s3071 s3072 c001 re 0001 ge 0001 be 0001 ro 0002 go 0002 bo 0002 re 0003 ge 0003 go 1024 bo 1024 c768 re 0001 ge 0001 be 0001 ro 0002 go 0002 bo 0002 re 0003 ge 0003 go 1024 bo 1024 3.4 power up/down sequence timing specifications: 0 t1 10ms 0 t2 50ms 0 t3 50ms t4 1s t5 170ms t6 200ms (min.) notes: 1. please avoid floating state of interface signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply for lcd vcc to 0v. 0v 0v 10% t6 t5 t4 t3 t2 t1 10% 90% 10% 90% vcc signals ccfl
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 15/25 version 2.3 4. optical specifications the following optical specifications shall be measured in a darkroom or equivalent state (ambient luminance <= 1 lux, and at room temperature). the measurement must be taken after backlight warming up for 20 minutes. the operation temperature is 25 o c 2 o c. the measurement method is shown in note 1. parameter symbol condition min. typ. max. unit note central luminance l center, i l =6.0ma 170 200 - cd/m 2 1, 2, 4 contrast ratio cr center 150 200 - - 1, 3 x + 40 45 50 horizontal x - 40 45 50 y + 10 15 20 vertical y - center cr 10 30 35 40 x + 58 63 68 horizontal x - 58 63 68 y + 25 30 35 viewing angle vertical y - center cr 5 45 55 60 degree 1, 4 average luminance l ave i l = 6.0ma 150 180 - cd/m 2 1, 5 brightness uniformity buni x = y = 0 o 1.0 1.4 1.6 1, 6 rising tr - 15 30 ms response time falling tf center x = y = 0 o - 35 50 ms 1, 7 xw 0.290 0.310 0.330 yw 0.310 0.330 0.350 x r 0.560 0.580 0.600 y r 0.308 0.328 0.348 x g 0.280 0.300 0.320 y g 0.542 0.562 0.582 x b 0.136 0.156 0.176 chromaticity y b center x = y = 0 o 0.097 0.117 0.137 1, 8 cross talk ct x = y = 0 o - - 4.0 % 1, 9
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 16/25 version 2.3 note 1: the method of optical measurement: note 2: definition of central luminance (l): central luminance must be measured at the central point of the lcd module and at the viewing angle of the x = y = 0 o (note 4). note 3: definition of contrast ratio (cr): contrast ratio measurement must be made at the viewing angle of the x = y = 0 o (note 4) and at the central point of the lcd module. the lumi nance (note 2) shall be measured with all pixels in the viewing field set initially to be white state, then black state. note 4: definitions of viewing angle : photometer (topcon bm-5a) field=2 o 50 cm tft-lcd module cr = luminance with all pixels in white state luminance with all pixels in black state 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x ? x + y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 17/25 version 2.3 note 5: definition of average luminance: the average luminance is defined as arithmetic mean value of five spots across the lcd surface at white state. the luminance (note 2) shall be measured with all pixels in the viewing field at white state. the measuring spots must be taken at the locations shown in the following figure, where a = b = 15mm. luminance measuring points note 6: definition of brightness uniformity (b uni ): 5 lave = l1 + l2 + l3 + l4 + l5 1 2 3 5 4 d/2 3d/4 w/4 w/2 3w/4 d/4 d w a b a b a b a b buni= maximum luminance of 5 points minimum luminance of 5 points
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 18/25 version 2.3 note 7: definition of response time: the response time is set initially by defining the ? rising time (tr)? and the ? falling time (tf)? respectively. tr and tf are defined as following figure. note 8: definition of chromaticity: the color coordinates (xw, yw), (x r ,y r ), (x g ,y g ), and (x b ,y b ) are obtained with all pixels in the viewing field at white, red, green, and blue states, respectively. white black white tr 0% 10% 90% 100% tf data input
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 19/25 version 2.3 note 9: definition of cross talk (ct): ct = | y b ? y a | / y a x100 (%), where: y a = luminance of measured location without darkest gray pattern (cd/m 2 ) y b = luminance of measured location with darkest gray pattern (cd/m 2 ) a ctive y a, u (512, 96) y a, r (896, 384) y a, d (512, 672) y a,l (128, 384) (0, 0) ( 1023, 767 ) gray 32 a ctive gray 0 (256, 192) (768, 576) ( 0, 0 ) y b,u (512, 96) y b,r (896, 384) y b, d (512, 672) y b, l (128, 384) (1023, 767) gra y 32
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 20/25 version 2.3 5. reliability test item no. test item conditions criterion (note) 1. high temperature storage test ta = 6 0 o c , 500h #1,#2,#3,#4,#5 2. low temperature storage test ta = - 2 0 o c, 500h #1,#2,#3,#4,#5 3. high temperature and high humidity operation test ta = 4 0 o c, 95%rh 500h ( no condensation ) #1,#2,#3,#4,#5 4. high temperature operation test ta = 5 5 o c, 500 h #1,#2,#3,#4,#5 5. low temperature operation test ta = - 5 o c, 48h #1,#2,#3,#4,#5 6. vibration test ( operating ) 10 ~ 500 hz, 1 g, 20 min./cycle, x,y,z, each 3 times #3,#4,#5 7. mechanical shock ( non-operating ) 50 g, 11 ms, half sine wave, x,y,z, each 1 times #3,#4,#5 note : the criterions are as following. #1 : the contrast ratio criterion after this test item are ? cr 20% or cr > minimal specification. cr is the contrast ratio variation which is measured before and after this test item. #2 : the module power supply current ( icc) maximal specification after this testing item. #3 : the module is functional work after this test item. #4 : the defect or mura are not increase after this test item. #5 : the mechanical outline is no abnormal change , for example, inflation, distortion or metal frame shift. 6. mechnical drawing please refer to the attached drawings.
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 21/25 version 2.3 7. precaution 7. 1 assembly and handling precaution (1) do not apply rough force such as bending or twisting to the module during assembly. (2) to assembly and install module into user?s system are only in clean working areas. the dust and oil may cause an electrical short or worsen the polarizer. (3) it?s not permitted to pressure or impulse the module because the lcd panel and backlight. (4) always follow the correct power sequence when user connects and operates the lcd module to prevent damage to the cmos lsi chips during latchup. (5) do not pull the i/f connectors in or out while the module is operation. (6) do not disassembly the module. (7) use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) any moisture come into contact with the lcd module is dangerous because lcd modules is turned on with moisture on its surface may cause it damage. (9) the high temperature or humidity may reduce the performance of module, to store lcd module within the specified storage condition. (10) the ambient temperature is lower than 10oc may reduce the display quality, for example, response time become slowly, the starting voltage of ccfl is higher than room temperature. 7.2 safty precaution (1) the startup voltage of backlight is approximately 1000 volts. it may cause electrical shock during assembly with inverter. do not disassemble the module or insert anything into the backlight unit. (2) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 22/25 version 2.3 8. packaging 8.1 packing specifications (1) 10 lcd modules / 1 box (2) box dimensions : 443(l) x 433(w) x 388(h) mm (3) weight : approximately 14.5 kg ( 10 modules per box) 8.1 packing method the figure. 8-1,2 show the packing method. figure. 7-1 packing method figure. 8-1 packing method
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 23/25 version 2.3 figure. 8-2 packing method
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 24/25 version 2.3 9. incoming inspection day the supplier should be acquainted the inspection results (acceptance or rejection) by customer, and the results are in accordance with the incoming inspection standard within 30 days after the date of the bills of lading. should customer fail to so notify the supplier within the said 30 days period. the customer?s right to reject the lcms shall then lapse, and the said lcms shall be deemed to have been accepted by the customer.
doc.no: 14004018 issue date: may.23,2000 model: M141X101 approval 25/25 version 2.3 10 . definition of shipping label on module the barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. (1) model name : M141X101 (2) revision : rev.xx, for example : c1, c2 ?etc. (3) serial id : 0 1 c 1 0 0 1 0 3 9 1 0 0 0 1 serial id include the information as list. 1. manufactured date : year : 0~9, for 2000~2009 month : 0~9, a~c, for jan. ~ dec. day : 0~9, a~y, for 1 st to 31st, exclude i and o 2. revision code : cover all the change 3. model code 4. serial no. : manufacturing sequence of product 5. product line : 1 -> line1, 2 -> line 2 ?,etc. serial no. product line year, month, date cmo internal use cmo internal use revision model code made in taiwan m 1 4 1 x 1 0 1 rev. c1 0 1 c 1 0 0 1 0 3 9 1 0 0 0 1 chi mei optoelectronics

high voltage caution e207943 reating: 5vdc 450ma model: M141X101

▲Up To Search▲

Price & Availability of M141X101

	To Download M141X101 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .